TECHNOLOGY

2023-05-25 14:14

The solution to the die-cutting stop of the die-cutting machine

First of all, we must check whether the part of the die cutting machine continues to have repeatability, if it is a regular recurrence, then the problem is undoubtedly related to the die cutting knife. In this case, if the round pressure round die cutting, can increase the overall die cutting working pressure, the result will deal with the die cutting continuous problem, but also accelerate the damage of the die cutting knife.

Learn More →

2023-05-25 14:14

What are the categories of die-cutting machines?

Die cutting machine is also called beer machine, cutting machine, CNC punching machine, mainly suitable for some non-metallic materials, self-adhesive, EVA, double-sided adhesive, electronics, mobile phone pads, etc. die cutting (full break/half-break), indentation and hot stamping operations, laminating, and automatic waste discharge, die cutting machine using a steel knife, hardware mould, through the embossing plate exerts a certain pressure, the print or cardboard rolled and cut into a certain shape. It is an important equipment for post-press packaging processing and moulding. In the electronics industry and printing industry is widely used.

Learn More →

2023-05-25 14:13

Die cutting machine operation, should pay attention to the law of the seven major problems

Die-cutting industry personnel may know, composed of four major parts of the die-cutting is, die-cutting machine, die-cutting die, die-cutting materials and die-cutting process, die-cutting machine is an important part of the machine, then I want to give you an introduction to the use of die-cutting machine, should pay attention to what problems in the process:. 1,Flat pressure die cutting machine more than equal indexing cam mechanism, the shape of the cam is reasonable is a key. The tension of the chain should be moderate, too tight, too loose will affect the accuracy of the die cutting. Flat pressure die cutting machine paper feeding teeth are now mostly solid, but still easy to deform in high-speed movement, large inertia when the emergency stop. A good row of teeth with high hardness and light weight, the angle and the size of the pressure is moderate.

Learn More →

2023-05-25 14:12

How to solve the problem of easy breakage of die-cutting waste material

There are many die-cutting manufacturers in order to maximise the pursuit of economic benefits in the material slitting, the waste side of the calculation is too small, resulting in die-cutting processing material waste edge strength is not enough to lead to breakage. Generally speaking, the cushioning foam material waste edge width requirements in more than 3mm, it also depends on the die-cutting materials, backing film waste edge width requirements of at least 1mm or more.

Learn More →

2023-05-25 14:11

Common die-cutting machine moulding faults and troubleshooting methods

Die-cutting machine die-cutting indentation production of qualified products, should be cut accurately, clean cut, no burrs, flower knife, indentation is clear, the depth of the appropriate. Common faults and solutions in die cutting and creasing operation

Learn More →

< 1 > 跳转到 页